Products
- Piston Seals
- Rod seals
- Wiper / Dust Seals
- Buffer Seals
- Vee Packings
- Pneumatic Seals
- Center Joint Seals
- Floating Seals
- Oil Seals
- Pin Seals
- Control Valve Seals
- Cylinder Seal Kits
- Gear Pump Kits
- O Rings
- Pump Couplings
- Cylinder Bushings
- Back Up Rings
- Wear Rings
- Hydraulic Pumps
- Gear Pumps
- Transmission Pumps
- Oil Pumps
Piston Seals |
| Piston seals maintain sealing contact in sliding motion between the piston and cylinder bore for hydraulic and pneumatic equipment. |
Rod Seals |
| Rod seals are general terms describing sealing system used for moving parts with reciprocal movement of hydraulic & pneumatic equipment. |
Wiper / Dust Seals |
| The main feature of a dust seal is to seal outside dust. In addition, a sealing system using a dust seal, combined with rod packing and buffer ring, can prevent oil film being scraped out. |
Buffer Seals |
| Buffer seal is used in combination with rod packing to absorb the impact and fluctuating pressure at high load, to isolate high temperature fluid, and to improve the durability of the packing. |
Vee Packings |
| Vee packings can be used for severe operating conditions by plying packings according to the operation pressure. Both packings for piston and rod seals are fabric reinforced and made of nitrile rubber. |
Pneumatic Seals |
| Pneumatic seal are general terms describing sealing system for low pressure. Pneumatic seals can be used for both piston and rod seals. |
Center Joint Seals |
| Center Joint Seal is a special case for center swivel with excellent wear resistance and extrusion proof ability. Since perfect sealing can not be expected, please provide a drain at the end and use oil seals for rotating pressure with the seal. |
Floating Seals |
| Floating seals are used for the purpose of maintaining steady flow of lubricating oil and preventing the infiltration of impurities. |
Oil Seals |
| Oil seals are components of a machine that seal lubricants. Lubricants are used in the friction – producing areas of machine to ensure smooth movement and long life. Oil seals are used to prevent lubricants from leaking through bearings clearances of the machine. |
Pin Seals |
| Pin Seals are dust seals for oscillating and rotating movement for hing pin and bush. Pin seals can be used under severe dust conditions to improve the durability of the equipment. Relief effect ease the process of draining used grease when filling up new grease. |
Control Valve Seals |
| Control Valve Seals are special seals mainly used for valve unit of industrial equipment. Control valve seals have excellent sealing ability and low friction. |
Cylinder Seal Kits |
| Hydraulic cylinder seal kits for Boom, Arm, Bucket, Lift, Tilt, Steering , Track Adjuster, Center Joint, Control Valve, Pilot Valve, Main pump, Gear Pump, Travelling Motor, Swing Motor and Reduction Device. |
Gear Pump Kits |
| Pump Kits are used for gear pump, combined together with oil seal to prevent the leakage of oil. |
O Rings |
| Materials of o-rings require such characteristic such as small compression set, better wear resistance, better oil resistance, and better heat resistance. |
Pump Couplings |
| Pump couplings are used for generator, pump driving of excavators. |
Cylinder Bushings |
| Cylinder bushing or dry bearings have low coefficient of static and dynamics friction, good strength and dimensional tolerance. These dry bearings are applied to cylinder for a variety of industries and hydraulic systems. |
Back Up Rings |
| Back Up Rings are rigid rings used to hold elastomeric seals to their designed shape. Back Up Rings are commonly used with O-rings, lip seals and as a reciprocating shaft seals. |
Wear Rings |
| This is used as bearing of rod and piston to prevent its scoring or eccentricity and to improve the durability of the packing. |
Pumps |
| Pump assembly for Hydraulic, Gear, and Transmission pumps. |
Pumps |
| Pump Assembly for Gear and Oil pumps. |